Ultrasonic cleaner generates cavitation which are millions of air bubbles which implode and dislodge debris from the items submerged in water. iSonic Ultrasonic C-Pap Deep Cleaner cleans in crevices and inside the hose. In comparison, ozone or UV cleaners only disinfect the top surfaces and they do not remove debris so debris are accumulated in the mask and the hose. A stainless weight bracket holds down the mask and the hose from floating. P4831-CPAP has a tank capacity of 3. 2Qt/3L and tank size of 9. 8″x6. 9″x3. 1″ which fits a 6′-long hose, an optional heater that heats water to up to 140F/60C. It has a touch sensing control panel, a convenient power switch, a plastic basket to hold the mask and the hose. It’s equipped with a 80W super-sized ultrasonic stack transducer which is three times more powerful compared to wafer transducer used on small personal ultrasonic cleaners. Some manufacturers use wafer transducers in their commercial models but they do not have the same cleaning power of stack transducers. A box of 48 cleaning tablets is included to help to deep clean the parts and to remove odors. To dry a hose, either hang it to drip dry or use a blow dryer which will speed up drying. Do not use too high temperature. For large face mask and water chamber that are taller than the tank, dismantle them or clean them one side first then turn them upside down to clean the other half.
FDA has issued a consumer awareness statement on 2/27/20 against ozone and UV c-pap cleaner. In contrast, iSonic ultrasonic C-PAP cleaners remove debris and do a thorough cleaning inside and out. This is a FDA registered Class 1 Medical Device.
Make sure this fitsby entering your model number.
Deep cleans mask, hose and other parts thoroughly. Medium size. See P4862-CPAP for large size, P4821-CPAP for small size.
Unlike ozone or UV cleaners which do not remove debris, the ultrasonic cleaner deep cleans mask, hose and other parts inside and out
The ultrasonic cleaner generates cavitaion which are millions of air bubbles which implode and dislodge debris from inside of crevices and hose
Powerful and supersized 80W ultrasonic stack transducer generates strong ultrasonic waves. 110V for North America
Stainless weight bracket holds down the mask and the hose so they will not float.
For large mask and water chamber, dismantle them or clean them one side first then turn them upside down to clean the other half
To dry hose, either hang it to drip dry or use a blow dryer which will speed up drying. Do not use too high temperature
110V for North America. 220V version is a seperate unit. Contact iSonic if needed
An optional blow dryer can be used to dry up hose quickly
A box of 48 cleaning tablets is included